Directional Size Magnification (Inch) - Savin 2555 Copy Reference Manual

Copying

Directional Size Magnification (inch)

The suitable reproduction ratios will be automatically selected when you enter
the horizontal and vertical lengths of the original and copy image you require.
2
2
1: Horizontal original size
2: Vertical original size
3: Horizontal copy size
4: Vertical copy size
Preparation
Specify the vertical and horizontal sizes of the original and those of the copy,
as shown in the illustration.
Limitation
If the calculated ratio is over the maximum or under the minimum ratio, it is
corrected within the range of the ratio automatically. However, with some ra-
tios, parts of the image might not be copied or blank margins will appear on
copies.
Note
You can enter sizes within the following ranges:
Metric version
Inch version
The following ratios can be selected:
• Metric version: 25 – 400%
• Inch version: 25 – 400%
104
1
3
1 – 999mm (in 1mm steps)
0.1" – 99.9" (in 0.1" steps)
4
CP2M01EE