Size Magnification - Savin 2235 Operator's Manual

AdonisC2_ENcopy122F_FM.book Page 75 Thursday, February 15, 2001 3:23 PM

Size Magnification

This function calculates an enlarge-
ment or reduction ratio based upon
the lengths of the original and copy.
Amm
Preparation
Measure and specify the lengths of
the original and copy by compar-
ing "A" with "a."
Limitation
❒ If the calculated ratio is over the
maximum or under the minimum
ratio, it is corrected within the
range of the ratio automatically.
However, with some ratios, parts
of the image might not be copied
or blank margins will appear on
copies.
Note
❒ A ratio is selected in the range of 25
to 400%.
A
Press the [Reduce/Enlarge] key.
B
Press the [Specifid Ratio] key.
amm
C
Make sure that the [Specifid Ratio]
key is highlighted.
D
Enter the length of the original
with the number keys and press
the [#] key.
Note
❒ You can enter sizes within the
following ranges:
Metric
version
Inch
version
❒ To change the length entered,
press the [Clear] or {Clear/Stop}
key and enter the new length.
Size Magnification
1 – 999mm (in 1mm steps)
0.1" – 99.9" (in 0.1" steps)
2
75