Fisher & Paykel OR90 Series Installation Manual page 12

IMPORTANT!
To restrain the cooker and prevent it tipping accidentally secure
●
the cooker to the wall using the supplied anti-tip bracket. Make
sure you also fit the supplied lock pin to the anti-tip bracket.
If installing the cooker above a plinth (without fitting the
●
adjustable feet) revise the installation dimensions for the anti-tip
bracket accordingly, considering that the feet have the following
measurements: min 85mm - max 133mm.
Before drilling and holes or inserting any screws into the floor or
●
wall check that you will not damage any wiring or pipes.
To fit the anti-tip bracket
1 Loosely fix the anti-tip bracket to the wall using the supplied screws.
Drill two 8mm diameter holes in the wall and insert the supplied
●
plastic sleeve anchors before inserting the screws.
2 Slide the cooker into place and adjust the height of the bracket so
that it will align with the slot on the back of the cooker.
3 Tighten the screws to fix the anti-tilt bracket in place.
4 Push the cooker back into place so that the bracket is fully inserted
into the slot on the back of the cooker.
12
!3
INSTALLING THE ANTI-TIP BRACKET
anti-tip bracket
bracket slot at back
of the cooker
Dotted line showing the position
of the cooker when installed
40mm
min. 167mm
max. 217mm