Energy Star Program - Ricoh SP 3500SF Manual

ENERGY STAR Program

ENERGY STAR Program Requirements for Imaging Equipment
®
The ENERGY STAR Program Requirements for Imaging Equipment encourages energy
®
conservation by promoting energy efficient computers and other office equipment.
The program backs the development and dissemination of products that feature energy sav-
ing functions.
It is an open program in which manufacturers participate voluntarily.
Targeted products are computers, monitors, printers, facsimiles, copiers, scanners, and multi-
function devices. Energy Star standards and logos are internationally uniform.
This machine is equipped with the following Energy Saver modes: Energy
Saver mode 1 and Energy Saver mode 2. The machine recovers from Energy
Saver mode when it receives a print job, prints a received fax, or when the
{Copy} or {Start} key is pressed.
Energy Saver mode 1
❖
This machine automatically enters Energy Saver mode 1 about 30 seconds
after the last operation is completed.
Energy Saver mode 2
❖
This machine automatically enters Energy Saver mode 2 10 minutes after
the last operation is completed.
Specifications
❖
Energy Saver mode 1
Energy Saver mode 2
aモデル対象外なのでタイトルを「ENERGY
STAR Program (SP 3510DN only)」のように修
正します。
Power Consumption
Default Time
Recovery Time
Power Consumption
Default Time
Recovery Time
70 W
OFF
10 seconds
10 W
1 minute
20 seconds or less
Draft 2011/08/29
13