Changing the Equipment Settings
Boot Menu
Boot Menu is used to change system settings.
Only the administrator should use this menu.
To enter [Boot Menu] menu, an administrator
password is necessary.
Memo
● The default password is "999999 ".
3
1
Turn off the printer.
2
Hold down the <ENTER> button and
press power switch.
3
Press the <ENTER> button.
4
Enter the administrator password using
the numeric keypad.
5
Press the <ENTER> button.
6
Press the scroll button
setup menu on which you want to
change a setting and then press the
<ENTER> button.
7
Change the setting and then press the
<ENTER> button.
8
Press the <ON LINE> button to exit the
menu mode.
to select the
- 60 -
Other Settings
1
Press the scroll button
setup menu on which you want to
change a setting and then press the
<ENTER> button.
2
Change the setting and then press the
<ENTER> button.
3
Press the <ON LINE> button to exit the
menu mode.
to select the