Oki C813n User Manual page 65

Item
Tray Tray4 Config
Configuration
* Displayed
when an
optional tray
is installed.
Paper Feed
Auto Tray Switch
Tray Sequence
Duplex Last Page
System Power Save time
Adjust
Sleep Time
Auto Power Off Time
Silent Mode
Clearable Warning
Auto Continue
Manual Timeout
Timeout InJob
Timeout Local
Timeout Network
Low Toner
Print Mode w/o Color Toner
Jam Recovery
Error Report
Factory Default
Paper Size Cassette Size
X Dimension 210millimeters
or
8.5inches
Y Dimension 297millimeters
or
11inches
Media Type Plain
Media Weight Light
Legal Paper Legal14
Other Size 16K(184x260mm)
[SEF]
Tray1
On
Down
Skip Blank Page
1 minute
15 minutes
4 hours
On
ONLINE
Off
60 seconds
40 seconds
40 seconds
90 seconds
Continue
Alam
On
Off
- 65 -
Changing the Equipment Settings
Description
Selects a paper size for Tray 4.
Sets a width of a custom paper for Tray 4.
Sets a length of a custom paper for Tray 4.
Selects a paper type for Tray 4.
Selects a paper weight for Tray 4.
Sets a legal paper size for Tray 4.
Sets other standard paper size for Tray 4.
Selects a paper tray.
Sets whether to enable the auto tray
switching function.
Sets the priority of tray order for auto tray
selection/auto tray switching.
When [Skip Blank Page] is selected, the
last page of an odd-numbered duplex print
job is printed in simplex.
When [Always Print] is selected, the
printer always prints a document in
the duplex mode if the duplex mode is
selected. Some applications may not work
properly.
Sets how many minutes the printer waits
before activating the power save mode.
Sets the time to switch from the power
save mode to the sleep mode.
Sets the time to switch from the standby
mode to the power off mode.
Specifies a print preparation operation
when entering standby status from Sleep
mode.
Sets the timing for deletion of clearable
warnings.
Sets whether to recover the printer
automatically when a memory overflow or
tray requesting occurs.
Sets how many seconds the printer waits
for the paper to be fed from the manual
paper tray.
Sets how many seconds the printer will
wait before force printing a job after the
data stops coming.
Sets how long each port is left opened
after a job is complete. (The network is
excluded.)
Sets how long the network port is left
opened after a job is complete.
Sets whether to continue or stop printing
when a low on toner error occurs.
Specifies the action when there is an
empty color toner.
Sets whether the printer will attempt to
re-print any pages lost due to a paper jam
once the jam has been cleared.
Sets whether to print out the error details
when an internal error occurs.
3