Telnet - Oki C813n User Manual

Windows Utilities
3
Click [Update].
4 Click [OK].
Reference
● Click [Web Setting] to automatically launch the web
page. You can change printer settings on this web page
screen. For details, refer to
Setting Options Automatically
You can get the composition of options of the
connected printer and automatically set the print
driver.
Memo
● You cannot configure this when using Network Extension
4
in unsupported environments.
„ For Windows PCL drivers.
1 Open the printer properties screen.
Reference
● "Launching the Utility" P.89
2 Select the [Device Options] tab.
3 Click [Get Printer Settings].
4 Click [OK].
„ For Windows PS Drivers
1
Open the printer properties screen.
Reference
● "Launching the Utility" P.89
2
Select the [Device Settings] tab.
3 Click [Get installable options
automatically] and then click [Setup].
4 Click [OK].
Uninstalling the Utility
1 Click [Start], and then select
[Control Panel] > [Add or Remove
Programs].
2
Select [OKI Network Extension] and
click [Remove].
3
Follow the instructions on the screen and
complete the uninstallation.
"Web page" P.81.

TELNET

You can configure settings with Telnet
commands.
Note
● Telnet access to the printer settings is turned off in the
initial settings.
In order to use Telnet commands, set [Telnet] to [Active],
either on the webpage or on the printer control panel.
● For Windows 7/Windows Vista/Windows Server 2008 R2/
Windows Server 2008, Telnet commands are inactive in
the initial settings.
In order to use Telnet commands, select [Start] > [Control
Panel] > [Programs] > [Programs & Functions] >
[Activate or Deactivate Windows Functions]. Set
[Telnet Client] to active in the displayed dialog box.
Memo
● For the next procedure, the following environment will be
used as an example. The details may differ depending on
the OS you are using.
- OS: Windows 7
- IP Address: 192.168.0.2
- MAC Address: 00:80:87:84:9C:9B
1
Click [Start] and select [All
Programs] > [Accessories] >
[Command Prompt].
2
Following "(Driver Password): /Users/
Username>" enter "ping (Space) printer
IP Address". Press the <Enter> key and
check that access is enabled.
E.g.: "C:/Users/WINDOWS > ping 192.168.0.2"
3 Following "telnet (Space)", enter the
IP address of the printer and press the
<Enter> key in order to access the
printer through Telnet.
E.g.: "C:/Users/WINDOWS>telnet 192.168.0.2"
4
After "login:", enter "root" and press the
<Enter>.
5
If a prompt is displayed, enter your
password following "Password" and press
the <Enter> key.
Enter E.g: "password: 849C9B".
Memo
● The default "root" password is the last 6
alphanumerical digits of the printer's MAC address.
6
If a menu command is displayed, enter
the menu number you would like to
change, and press the <Enter> key.
7 Change the settings if necessary.
8
Save settings and log out of the printer.
- 90 -