Oki C813n User Manual page 67

Item
Print Adjust Trans. Black Setting
Trans. Color Setting
SMR Setting
BG Setting
HU Setting
VL Cleaning
Gloss Mode
Drum Cleaning
High Humid Mode
Moisture Control
Narrow Paper Speed
(Except C813/C823)
Warmup Control
Quiet Mode (Except C813/C823)
Factory Default
0
0
Cyan 0
Magenta 0
Yellow 0
Black 0
Cyan 0
Magenta 0
Yellow 0
Black 0
Off
(NULL)
Off
Off
Off
Off
Mode1
Off
Off
- 67 -
Changing the Equipment Settings
Description
Sets values to make a fine adjustment if
the printing result is faded or there are
dust specks on the print when printing in
OHP and black mode. Decrease the value
when there are dust specks in the area
printed with high density. Increase the
value when the printing result is faded.
Sets values to make a fine adjustment if
the printing result is faded or there are
dust specks on the print when printing in
OHP and color mode. Decrease the value
when there are dust specks in the area
printed with high density. Increase the
value when the printing result is faded.
Corrects variations in print results caused
by temperature and humidity conditions
and differences in print density and
frequency. Change the setting if the print
quality is uneven.
Corrects variations in print results
caused by temperature and humidity
conditions and difference in print density
and frequency. Change the setting if the
background is dark.
This must be set when the printer is used
again after not being used for an extended
period.
Used when vertical white streaks appear.
Sets On/Off for High Gloss print mode.
Sets whether to perform drum rotating
before printing to reduce lateral white
lines on the print. Note that drum rotating
shortens the ID life.
Sets the curling reduction mode to on/off.
Sets whether to enable the condensation
control.
Sets the printing speed of narrow paper.
Normal: Do not change printing speed
when printing narrow paper.
Mode1: Change printing speed to slow
when printing narrow paper.
Mode2: Do not change printing speed
when printing narrow paper, but when it
switches to print wide paper, it takes same
time to remove hotoffset.
Sets how warmup is performed.
Sets print speed in low speed.
3