Table of Contents
Advertisement
Disconnecting the wireless antenna cables
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
NOTE:
The wireless card is integrated into the system board and can not be removed.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1
Remove the
base
cover.
2
Remove the battery.
Procedure
1
Remove the screw (M1.6x2.5) that secures the wireless-card bracket to the system board.
2
Lift the wireless-card bracket off the wireless card.
3
Disconnect the antenna cables from the wireless card.
computer. After working inside your computer, follow the instructions in
After working inside
www.dell.com/
Disconnecting the wireless antenna cables
9
17
Advertisement
Table of Contents
