Table of Contents
Advertisement
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1
Remove the
base
cover.
2
Remove the battery.
3
Disconnect the
wireless
card.
Procedure
1
Peel off the tape that secures the display cable to the hard-disk plate.
2
Remove the two screws (M1.6x2.5) securing the display cable bracket to the system board
3
Lift the display cable bracket off the display cable.
4
Using the pull tab, disconnect the display cable from the system board.
5
Disconnect the touch-screen cable from the system board.
6
Disconnect the camera cable from the system board.
Removing the display assembly
computer. After working inside your computer, follow the instructions in
After working inside
www.dell.com/
Removing the display assembly
17
27
Advertisement
Table of Contents
