Table of Contents
Advertisement
7
Open the latch and disconnect the power-button cable from the system board.
8
Open the latch and disconnect the fingerprint-reader cable from the system board.
9
Open the latch and disconnect the battery-status light cable from the system board.
10
Open the latch and disconnect the touch-pad cable from the system board.
11
Open the latch and disconnect the keyboard-backlight cable from the system board.
12
Open the latch and disconnect the keyboard-controls board cable from the system board.
13
Peel off the tape that secures the speaker cable to the system board., then disconnect the speaker cable from the system board.
14
Disconnect the coin-cell battery from the system board.
15
Remove the screw (M1.6x3) that secures the system board to the palm-rest assembly.
16
Remove the seven screws (M1.6x2.5) that secure the system board to the palm-rest assembly.
Removing the system board
31
Advertisement
Table of Contents
