Table of Contents
Advertisement
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Align the screw holes on the base cover with the screw holes on the palm-rest assembly and snap the base cover into place.
2
Using your fingertips, open the system badge.
3
Replace the screw (M1.6x4) under the system badge that secures the base cover to the palm-rest assembly.
4
Replace the eight screws (M2x3, Torx) that secure the base cover to the palm-rest assembly.
Replacing the base cover
computer. After working inside your computer, follow the instructions in
After working inside
www.dell.com/
Replacing the base cover
4
11
Advertisement
Table of Contents
