Table of Contents
Advertisement
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Remove the eight screws (M2x3) that secure the base cover to the palm-rest assembly.
2
Using your fingertips, open the system badge.
3
Remove the screw (M1.6x4) under the system badge that secures the base cover to the palm-rest assembly.
4
Starting from the front corner of the computer, pry up the base cover using a plastic scribe and lift the base cover off the palm-rest
assembly.
Removing the base cover
computer. After working inside your computer, follow the instructions in
After working inside
www.dell.com/
Removing the base cover
3
9
Advertisement
Table of Contents
