Drive Interface Connectors
The drive cable connectors are keyed for correct insertion. Properly align the
cable connector key on the cable and the drive before connecting.
Connecting and Disconnecting Drive Cables
When connecting and disconnecting a serial ATA data cable, disconnect the
cable using the pull-tab.
The serial ATA interface connectors are keyed for correct insertion; that is, a
notch or a missing pin on one connector matches a tab or a filled-in hole on
the other connector.
Hard Drives
CAUTION:
safety instructions in the Product Information Guide.
CAUTION:
other unexpected injuries, always unplug your computer from the electrical outlet
before opening the cover.
NOTICE:
the drive on a surface, such as a foam pad, that will sufficiently cushion it.
NOTICE:
back up your files before you begin this procedure.
Check the documentation for the drive to verify that it is configured for
your computer.
126
Removing and Installing Parts
Serial ATA Connector
1
2
1 interface cable
Before you begin any of the procedures in this section, follow the
To guard against electrical shock, laceration by moving fan blades, or
To avoid damage to the drive, do not set it on a hard surface. Instead, set
If you are replacing a hard drive that contains data you want to keep,
2 interface connector