Sanyo PLC-XE50 Owner's Manual page 64

Appendix
The Remote Control does not
work.
Indicators blinks or lights.
Alarm does not stop ringing.
Warning mode is not turned on.
Computer 2 cannot be selected.
The Terminal function cannot be
selected.
appears on the screen
Unable to unlock the Logo PIN
code lock or Security PIN code lock.
WARNING :
High voltages are used to operate this projector. Do not attempt to open the cabinet.
If problems still persist after following all operating instructions, contact the dealer where you purchased the
projector or the service center. Specify the model number and explain about the problem. We will advise you
how to obtain service.
The CE Mark is a Directive
conformity mark of the European
Community (EC).
Pixelworks ICs used.

– Check the batteries.
– Make sure no obstruction is between the projector and the remote
control.
– Make sure you are not too far from the projector when using the remote
control. Maximum operating range is 11.5' (3.5 m).
– Make sure the code of the remote control is conformed to that of the
projector (see page 50).
– Check the status of the projector with referring to "INDICATORS AND
PROJECTOR CONDITION" on page 67 .
– For Alarm indicator, see pages 53-54.
– Connect the AC power cord to the AC outlet. (Alarm will not stop ringing
when the alarm goes off while trying to remove the rechargeable battery
cover.) See page 53-55.
– If you cannot hear the bleeping sound when you press the Alarm buttons,
you are not pressing the buttons correctly. Try to set the Alarm setting
again. See page 53.
– Select Computer 2 in the Terminal function (see page 48).
– The Terminal function cannot be selected after Computer 2 is selected.
Select other input source such as Computer 1 or Video with the
COMPUTER button or the VIDEO button on the remote control so that the
Terminal function can be selected.
– Your operation is invalid. Operate correctly.
– Contact the dealer where you purchased the projector or the service
center.
This symbol on the nameplate means the product
is Listed by Underwriters Laboratories Inc. It is
designed and manufactured to meet rigid U.L.
safety standards against risk of fire, casualty and
electrical hazards.