Installation; Positioning The Projector - Sanyo PLC-XE50 Owner's Manual

Installation

Positioning the Projector

For the projector positioning, see the figures below.
The projector should be set perpendicularly to the plane of the screen.
✔Note:
•This projector is not equipped with an optical zoom. To adjust the screen size, change the throw distance.
• The brightness in the room has a great influence on picture quality. It is recommended to limit the ambient
lighting in order to get the best image.
• All measurements are approximate and may vary from the actual sizes. Make sure to check the position of
images by projecting images on the screen before installing the projector and screen, since each projector
shows slight variations.
•Even slight warpage or irregularities of the screen may have an effect on the quality of the projected images.
-0.131' ( -4.0cm)
Screen Size
(W x H) mm
4:3 aspect ratio
A
B
1
(Inch Diagonal)
0.265' (8.1 cm)
60" 64"
1219 x 914 1300 x 975
-0.131' (-4.0 cm) -0.052' (-1.6 cm) 0.068' (2.1 cm)
1.010' (30.8 cm) 1.050' (32.0 cm) 1.106' (33.7 cm) 1.181' (36.0 cm) 1.198' (36.5 cm)
70" 78"
1422 x 1067 1585 x 1189
0.226' (6.9 cm)
80"
1626 x 1219
0.265' (8.1 cm)