Keystone Button; Image Button - Sanyo PLC-XE50 Owner's Manual

AUTO PC button
Press the AUTO PC button to operate the Auto PC function.
See page 28 for more details.
D.ZOOM buttons
Press the D.ZOOM buttons to zoom in and zoom out the
images. See page 35 for more details.
NO SHOW button
Press the NO SHOW button to black out the image. To
restore to normal, press the NO SHOW button again or
press any other button. When the projected image is
captured and is set as "User" in the Logo selection (p.46),
the screen changes each time you press the NO SHOW
button as follows.
black out ➜ the captured image ➜ normal ➜

KEYSTONE button

For details, see page 23.

IMAGE button

Press the IMAGE button to select an image level of the
screen. See pages 31, 39 for more details.
P-TIMER button
Press the P-TIMER button. The timer display "00:00"
appears on the screen and the timer starts to count time
(00:00–59:59).
To stop the P-Timer, press the P-TIMER button. Press the
P-TIMER button again, then the P-Timer display disappears.
LAMP CONTROL button
Press the LAMP CONTROL button to select the lamp mode
to change the brightness of the screen.
High ........... Brighter than the Normal mode.
Normal ....... Normal brightness
Auto ........... The brightness according to the input
signal.
Remote Control
VOLUME +/-
buttons
(See page 24.)
AUTO PC
button
D.ZOOM
buttons
NO SHOW
button
✔Note:
• See the previous page for the description
of other buttons.
• • • • •
"No show" disappears after 4 seconds.
P-Timer display
Basic Operation
/
KEYSTONE button
(See page 23.)
POINT ed
buttons
IMAGE button
P-TIMER button
LAMP CONTROL
button
5