Auto Pc Adjustment - Sanyo PLC-XE50 Owner's Manual

Computer Input

Auto PC Adjustment

Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal, and Vertical
positions to conform to your computer.
Direct Operation
The Auto PC adjustment function can be operated directly
with the AUTO PC button on the remote control.
Menu Operation
Auto PC Adj.
1
Press the MENU button to display the On-Screen
Menu. Use the Point
frame pointer to PC Adjust Menu.
2
Use the Point
pointer to Auto PC Adj. and then press the SELECT
button twice.
To store the adjusted parameters
The system parameters adjusted in the Auto PC Adjustment
can be stored in the projector. Once parameters are stored,
the setting can be done just by selecting a Mode in the PC
System Menu (p.27). See "Store" on page 30, for details.
✔Note:
• Fine sync, Total dots, Horizontal, and Vertical positions of
some computers cannot be fully adjusted with this Auto
PC Adjustment function. When the image is not provided
properly with this operation, manual adjustments are
required (pp.29-30).
• The Auto PC Adjustment cannot be operated when 480i,
575i, 480p, 575p, 720p,1035i, or 1080i is selected in the
PC System Menu (p.27).

buttons to move the red
7 8
ed buttons to move the red frame
/
Remote Control
AUTO PC button
PC Adjust Menu
PC Adjust Menu icon
Move the red frame pointer to the
Auto PC Adj. item and press the
SELECT button.
"Please wait... " appears while Auto
PC adjustment is in process.