Manual Pc Adjustment - Sanyo PLC-XE50 Owner's Manual

Manual PC Adjustment

Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector.
Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The
projector has five independent memory areas (Mode 1–5) to store those parameters manually adjusted, which
allows you to recall the setting for a specific computer.
1
Press the MENU button to display the On-Screen
Menu. Use the Point
frame pointer to the PC Adjust Menu icon.
2
Use the Point buttons to move the red frame
ed
pointer to the desired item and then press the SELECT
button to display the adjustment dialog box. Press the
Point buttons to adjust the value.
7 8
Fine sync
Use the Point buttons to adjust the value to cut off
7 8
flicker from the image displayed (from 0 to 31).
Total dots
Use the Point buttons to adjust the number of total dots
7 8
in one horizontal period to match your PC image.
Horizontal
Use the Point buttons to adjust the horizontal picture
7 8
position.
Vertical
Use the Point buttons to adjust the vertical picture
7 8
position.
Current mode
Press the SELECT button to show H-sync freq. and V-sync
freq. of the connected computer.
Clamp
Use the Point buttons to adjust the clamp level. When
7 8
the image has dark bars, try this adjustment.
buttons to move the red
7 8
PC Adjust Menu icon
PC Adjust Menu
Move the red frame pointer
to the desired item and
press the SELECT button.
Status (Stored/Free) of the
selected Mode.
Selected Mode
Use the Point
to adjust the value.
Press the SELECT button
here to move on to other
items.
Press the SELECT button
at "Current mode" to
show the information of
the connected computer.
Computer Input
buttons
7 8