Trouble On Paper Feeding - Epson SC-B7000 Series Service Manual

SC-F7000 Serie/SC-B7000 Series
17. Select Tube inner cleaning.
Select the corresponding color rows, and press the
liquid. (Page 117)
18. Discard the waste ink.
19. Reset the counter for the waste ink bottle from the control panel.
Maintenance Waste Ink Counter
20. Turn off the printer.
21. Remove the cleaning cartridges.
22. Lower the lock levers.
23. Start the printer in the Serviceman Mode.
Turn on the printer while pressing [Menu] + [Back] + [OK].
24. Select Ink Eject.
Select the corresponding color rows, and press the
cleaning liquid. (Page 116)
25. Select Switch between Ink cartridges and Ink
Select the corresponding color rows and
validate the ink tanks. (Page 114)
26. Turn off the printer.
27. Install the new ink tanks. (Page 79)
28. Install the chip units, and then pour ink into the ink tanks.
29. Turn on the printer.
30. Discard the waste ink.
31. Reset the counter for the waste ink bottle from the control panel.
Maintenance Waste Ink Counter
32. Select Initial ink charge.
Select the corresponding color rows, and press the
initial ink charge. (Page 118)
33. Select Nozzle Check.
Select Nozzle Check Pattern Print, and press the
nozzle check. (Page 109)
34. Perform cleaning if necessary. (Page 109)
TROUBLE SHOOTING
[Run] button to fill the cleaning
[OK]
[Run] button to eject the
tanks.
Ink tank, and press the [Run] button to
[OK]
[Run] button to perform the
[Run] button to perform the

Trouble on Paper Feeding

35. If the error persists, replace the Print Head.
2.5 Trouble on Paper Feeding
Refer to the service manual of SC-S30600 series.
Revision A
38
Confidential