Epson SC-B7000 Series Service Manual page 69

SC-F7000 Serie/SC-B7000 Series
17. Select Switch between Ink cartridges and Ink
Select All channels and Ink Tank
tanks.
Figure 3-26. [Switch between Ink cartridges and Ink tanks] screen
18. Turn off the printer.
19. Remove the ink cartridges.
20. Tighten the four screws loosened in
21. Confirm that the hooks shown in
22. Install the ink tanks.
DISASSEMBLY & ASSEMBLY
tanks.
and press the [Run] button to validate the ink
Step 9.
Figure 3-17 are set up.
Disassembly and Assembly Procedure
23. Secure the ink tanks with the four screws (one each).
24. Confirm that all the ink tanks are installed properly, then lower all the lock levers.
25. Secure the ink tank guard with the two screws.
26. Turn on the printer and confirm that there are no errors.
Revision A
(p64)
(p64)
69
Confidential