Epson SC-B7000 Series Service Manual page 63

SC-F7000 Serie/SC-B7000 Series
3.4.5.3 Print Head
When replacing/removing this part, refer to
A D J U S T M E N T
R E Q U I R E D Items and the Order by Repaired Part" (p86)
perform the specified operations including required adjustment.
Be careful not to touch the nozzle surface of the Print Head.
C A U T I O N
When using the functions of the service program, check that
the printer doesn't do any operations such as initialization.
REQUIRED TOOL
Ink Cartridge for service
Premium Glossy Photo Paper (250) 24 inch length or longer
(used in adjustment)
Thickness gauge (used in adjustment)
PREPARATION BEFORE REPLACEMENT
1. Turn on the printer.
2. Discard the waste ink.
3. Reset the counter for the waste ink bottle from the control panel.
Maintenance Waste Ink Counter
4. Start the service program and select
ADJUSTMENT (Sequence).
DISASSEMBLY & ASSEMBLY
"4.1.2 Adjustment
and make sure to
[OK]
When replace print head from
Disassembly and Assembly Procedure
5. Select Switch between Ink cartridges and Ink
Ink Cartridge for service and press the
service available.
This operation should be carried out after replacing the print head
C H E C K
so as not to use the user's ink.
P O I N T
Figure 3-13. [Switch between Ink cartridges and Ink tanks] screen
Revision A
tanks. Select All channels and
[Run] button to make Ink Cartridge for
Confidential
63