Epson SC-B7000 Series Service Manual page 67

SC-F7000 Serie/SC-B7000 Series
11. Remove the FFC clamp.
12. Remove the three screws, and remove the Print Head.
C) Silver M3x8 screw (Bit No.1): 3 pcs
13. Disconnect the Head FFCs from the Print Head.
Make sure to connect the Head FFCs straight and all the way in the
connector.
FFC clamp
Head FFCs
C
Figure 3-22. Removing the Print Head
14. Reassemble the printhead and other parts by reversing the disassembly procedure.
DISASSEMBLY & ASSEMBLY
Print Head
C
C
CR Unit
Disassembly and Assembly Procedure
AFTER REPLACEMENT
1. Start the printer in the Serviceman Mode.
Turn on the printer while pressing [Menu] + [Back] + [OK].
2. Select Printer Head Counter.
Press the [Run] button to reset the counter.
Figure 3-23. [Printer Head Counter] screen
Revision A
67
Confidential