Cornelius HELIX Installation Manual page 31

Alarm
A. Float failed error is triggered if the ice
Ice Maker Warning
A. No current to the auger motor error is
Ice Maker Alarm
A. Displayed for any blender error. Left or
Blender Reset Alarm
A. Communications error between the cabi-
Refrigeration Cabi-
net Communications
Error
A. If Dispenser loses communication a dis-
Dispenser Communi-
cations Error
A. If either Blender losses communication
Blender Communica-
tions Error
A. Unable to communicate with the SMART
SMART Gateway
Communications
Error
A. When the UI detects the temperature is
Cabinet Tempera-
ture Error
A. If recipe file cannot be read or written,
Unable to read/write
Recipe File
A. If the settings file cannot be read or writ-
Unable to read/write
Settings Files
© 2012-2014, Cornelius Inc. All Rights Reserved
Table 7. Alarms
Alarm Information
maker float does not have water.
shown in the main status window.
right blender reset icon present at
blender status area.
net and the PCB. Results in loss of tem-
perature data.
play error is shown in the status area.
Logs an error in the alarm menu.
an error is displayed in the status area
and log error in the alarm menu.
Respective blender status area will dis-
play blender reset icon.
gateway. A smart communication error
will display on main screen and a com-
mutation error will be logged.
higher than 41º F, it will mark a critical
warning of high temperature in the tem-
perature menu. Cabinet Temperature
Probe Alarm is posted on main status
window and logged into Alarms Status.
main status window displays critical
error pop up with reset option.
ten, the backup setting will be loaded
from the backup settings. If the files can-
not be loaded, main status window dis-
plays critical error pop up with reset
option.
- 27 -
Helix Installation Manual
Remedy
A. Check water supply.
A. The alarm is posted to the main status
window and logged in the alarm status.
A. This button attempts to recover the
blender. Normally requires a restart of
the current process. Log shows blender
error and the specific condition.
A. When communications is reestablished,
temperature is displayed.
A. Unit will not dispense drink or ice until
error is cleared and communication is
reestablished.
A. When communication is reestablished,
blender will reset at the beginning.
A. Smart Gateway will not operate but
other unit functionality operates nor-
mally.
A. Check to make sure the door is closed
and the gasket is sealing.
A. Call Service.
A. Call Service.
Publication Number: 621058497INS