Section 2: Framing; In Wall And Corner Dimensions; Alcove Above The Fireplace - Montigo DelRay DRL3613NI Installation & Maintenance Manual

Section 2: Framing

In Wall and Corner Dimensions

1). Frame in the enclosure for the unit with framing materials. The
framed opening for the assembled fireplace is 43⅜" wide, x 33
11/16" high x 14¼" deep
NOTE: When constructing the framed opening, please ensure there is
access to install the gas line when the unit is installed
856
11
33 16 "
362
1
14 4 "
12.700
* When sheetrock is used behind the fireplace, framing depth may be
1
2 "
increased by 1/2".
12.700
1
2 "
1206
1
47 2 "
Figure 3. Framing dimensions (Straight wall & Corner Installation).
XG0226 - 180904
1101.100
3
43 8 "
DIMENSIONS ARE IN INCHES
NAME
TOLERANCES:
FRACTIONAL 1/32" DM
Drawn by
TWO PLACE DECIMAL .015"
Revision / Date
THREE PLACE DECIMAL .005"
ANGULAR .5
Revision
ALL BENDS ARE ASSUMED
TO BE 90 UNLESS NOTED
Finish
OTHERWISE.
1101.100
3
43 8 "
1705
1
67 8 "
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/32"
TWO PLACE DECIMAL
Alcove above the fireplace
Figure 3.d Combustible Framing for shelves over the fireplace
When this appliance is installed directly on ANY combustible other
than wood flooring (carpet, vinyl, etc.). It must be installed on an
equivalent wood or metal panel. This material must extend the full
Clearances must be in accordance with local installation codes and
DATE Description
MNR36 Framing Assembly
31/07/2018
DWG. NO. MNR36 Framing Assembly
MATERIAL
SHEET 1 OF 3
SCALE 1:32 WEIGHT:
NAME DATE Description
MNR36 Freaming Corner Assembly
DM 15/08/2018
Drawn by
.015" DWG. NO.
Revision / Date
Installation
Ceiling Level
Non-combustible
materials. Alcove
over fireplace
1" Min.
Non-Combustible
Min.
header
84"
7.5"
Door
Opening
Floor
WARNING
width and depth of the appliance.
NOTICE
the requirements of the gas supplier
10.5"
7