Section 4: Wiring; Dr3613 (N/L) I-2 Wiring Diagram; Installation Of Electrical Supply - Montigo DelRay DRL3613NI Installation & Maintenance Manual

Section 4: Wiring

DR3613 (N/L) I-2 Wiring Diagram
BATTERY PACK
1.5V AA TYPE
1.5V AA TYPE
1.5V AA TYPE
RED
BLACK
1.5V AA TYPE
885 PROFLAME
OPTIONAL CPI/IPI SWITCH
PILOT
BURNER
MODEL
DR3613NI-2

Installation of Electrical Supply

Installations in Canada must be electrically grounded in accordance
with CSA C22.1 Canadian Electrical Code Part 1 and/or Local Codes.
Installations in the USA must be grounded in accordance with local
codes or, in the absence of local codes, with the National Electrical
Code, ANSI/NFPA 70.
NOTE: If any of the original wire supplied with the appliance is replaced,
it must be replaced with the same type, or its equivalent.
16
SPARK
SENSOR
MAIN ON/OFF
SWITCH
6
BLUE
WHITE
YELLOW/GREEN
ORANGE
10
GREEN
BLACK
BROWN
YELLOW
ORANGE
6
LED LIGHTS
LED1 - RED LED
LED2 AMBER LED
Figure 17. Wiring diagram for DR3613NI-2 with SIT Proflame Electronic Ignition
SW1
Installation
GREEN
MAIN Power
WHITE
120vac 60 hz
BLACK
6 amps
VARIABLE SPEED
COMFORT FANS
BLACK
WHITE
FANS ONLY IN
DR3613NI-2
XG0226 - 180904