Direct Wall Mounting - Sanyo CLT-5812 Instruction Manual

UP016DH(CLT5812) ENG OM
GETTING

Direct wall mounting

If you don't have a standard wall plate, you can mount your phone
directly to the wall. Before doing this, consider the following:
• Avoid electrical cables, pipes, or other items behind the mounting
location that could cause a hazard when inserting screws into
the wall.
• Try to mount your phone within 5 feet of a working phone jack to
avoid excessive cable lengths.
• Make sure the wall material is capable of supporting the weight of
the base and handset.
• Use #10 screws (minimum length of 1-3/8 inches) with anchoring
devices suitable for the wall material where the base unit will
be placed.
1
Insert two mounting screws into the wall,
(with their appropriate anchoring device),
3-15/16 inches apart.
Allow about 1/8 of an inch between the
wall and screw heads for mounting
the phone.
2
Refer to steps 1 through 6 on page E11 to
mount the telephone.
E12
3/7/05 5:21 PM Page 12
STARTED