Making Calls With Memory Dialing - Sanyo CLT-5812 Instruction Manual

UP016DH(CLT5812) ENG OM
DIRECTORY

Making calls with memory dialing

Memory dialing from Standby Mode
1
Press the MEM key. The handset displays
your programmed memory locations.
2
Press the
key, or enter the number (0 - 9) to select the memory location
you would like to dial.
3
Press the TALK/FLASH key. ¨
and the number you would like to dial
appear on the display. Then the displayed
number is dialed.
Notes:
• If you press the SELECT/CH key before the TALK/FLASH key, you can
confirm the name and the number stored in the selected memory location.
• Whenever you are using a memory menu screen, you must press a key within
30 seconds or the phone will return to standby.
• To exit the memory function without dialing, press the END key. The handset
returns to standby mode.
Memory dialing from Talk Mode
1
Press the TALK/FLASH key. ¨
2
After the display changes from "
press the MEM key.
3
Press the
key, or enter a number (0 - 9) to select the
memory location of the desired phone
number. If you press the SELECT/CH key,
the number is dialed.
4
To hang up, press the END key.
3/7/05 5:22 PM
VOL/RING or VOL/RING
Connecting
Connecting
Connecting
VOL/RING or VOL/RING
Page 25
¨
¨ appears.
Talk
" to " ",
E25