Sanyo CLT-5812 Instruction Manual page 24

UP016DH(CLT5812) ENG OM
DIRECTORY
6
Press the MEM or SELECT/CH key. ¨
Number
¨ is displayed. The cursor flashes
indicating that the display is ready for the
number to be entered.
Note:
You have 30 seconds after pressing the MEM or SELECT/CH key to enter the
number you wish to store. Otherwise, an error tone will sound and the phone
will return to standby mode.
7
Use the number keys to enter the phone
number. The phone number cannot
exceed 20 digits.
Use the REDIAL/PAUSE key to enter a pause in the dialing sequence.
The display shows a ¨
represents a two second delay of time between the digits.
Use the DELETE/TRANS key to delete digits as needed.
Notes:
• The pause feature is useful for long distance calling, credit card dialing, or
sequences that require a pause between digits.
• The pause key counts as one digit. Pressing the REDIAL/PAUSE key more
than once increases the length of a pause between numbers.
8
Press the MEM or SELECT/CH key. You will hear a confirmation
tone, and the following screen appears. Memory storage
is complete.
For example, if you store a name and
number into memory location number 01,
the display shows ¨
After about 2 seconds, the following
screen is displayed.
Repeat steps 2 - 8 to store more numbers.
9
Press the END key to return to standby mode.
E22
3/7/05 5:22 PM Page 22
Store
P
¨. Each pause counts as one digit and
Memory01 Stored
¨.