Making Calls With The Speed Dial; Deleting The Speed Dial - Sanyo CLT-5812 Instruction Manual

UP016DH(CLT5812) ENG OM
SPEED DIAL

Making calls with the speed dial

When the phone is in standby mode, simply press the SPEED DIAL
key. The number stored in the Speed Dial memory location is
instantly dialed.
Note:
If Speed Dial does not have a stored number, the handset will beep rapidly,
and the phone will not dial.

Deleting the speed dial

1
When the phone is in standby mode,
press and hold the SPEED DIAL key.
The following display appears.
2
Press the
Delete Number
¨
3
Press the SELECT/CH key.
The following display appears.
4
Press the
5
Press the SELECT/CH or DELETE/TRANS key.
You hear a confirmation tone, and the
following display appears. After about
2 seconds, the handset returns to
standby mode.
3/7/05 5:22 PM
VOL/RING or VOL/RING key to select
¨.
VOL/RING key to move the pointer to ¨
Page 31
Yes
¨.
E31