Steps For Entering Names And Special Characters - Sanyo CLT-5812 Instruction Manual

UP016DH(CLT5812) ENG OM
DIRECTORY

Steps for entering names and special characters

Refer to the letters on the number keys to select the
desired characters.
With each press of a numeric key, the displayed character appears in
the following order: Upper case letters first, lower case letters next
and finally the number corresponding to the key.
If you make a mistake while entering a name
Use the /TONE/
incorrect character.
Press the DELETE/TRANS key to erase, then enter the correct character.
To delete all characters, press and hold the DELETE/TRANS key.
Note:
If the next character uses the same number key, you must press the #/
to move the cursor over. Otherwise the next time you press the number key, it
changes the character that was previously set.
3/7/05 5:22 PM
or #/ key to move the cursor to the
Page 23
key
E23