Turret; Cup Tubes Configuration; Rotating The Cup Turret; Other Cup Configuration - Cornelius A.B.S. Unit Operator's Manual

Automated Beverage System
A.B.S. unit Major Subsystems Operation —

Turret

Cup Tubes Configuration

The cup tube configuration is 1 – Small; 1 –
Child; 1 – Large; 1 – Medium; 1- XL.
The cup tube configuration for Australia is 1 –
MD
Small; 2 – Large; 2 – Medium.
The hole mounting pattern is such that the cup
tubes will only mount in one location.

Rotating The Cup Turret

While in the manual mode – press the Cup
Size button corresponding to the cup tube you
wish to install. The turret will rotate until the
correct turret face is forward, allowing easy
mounting of the cup tube. In the standard con-
figuration, the 5th cup size is not being used.
If there are two medium cup tubes, when but-
ton #3 is pressed once the first medium turret
cup face is forward, the second time it is
pressed the second medium turret face will
rotate forward.

Other Cup Configuration

The unit can be configured with four or five
cup sizes. If only four cup sizes are needed,
usually two medium cup tubes are used.
The second medium cup tube can be omitted
and an extra large cup substituted. The extra
large cup tube mounting location can be iden-
tified by pressing cup size button #5.
© 1999 The Coca-Cola Company, Cornelius and 29
McDonald's Corporation. All Rights Reserved.