Voice Recording Options; Setting The Recording Guard; Erasing Voice Recordings - Sanyo SCP-4920 User Manual

Voice Recording Options

To switch speakerphone mode:
1. From the voice recorder menu (see page 80), highlight Play or
Play:Speaker and press
2. Highlight Voice Data and press
3. Highlight your desired voice recording and press
(right softkey).
4. Highlight Speaker On or Speaker Off and press
Tip:
You can also switch the speakerphone mode by pressing
(left softkey) during step 3 above.
To edit the title:
1. From the voice recorder menu (see page 80), highlight Play or
Play:Speaker and press
2. Highlight Voice Data and press
3. Highlight your desired voice recording and press
(right softkey).
4. Highlight Edit Title and press
5. Edit the title (up to 16 characters) and press
To set the audio quality:
1. Display the voice recorder menu (see page 80).
2. Highlight Record and press
3. Highlight Audio Quality or Mic Sensitivity and press
Audio Quality to change the recording quality.
Mic Sensitivity to change the microphone sensitivity.
4. Highlight High or Low and press
Note:
When Audio Quality setting is High, the total recording time will be
reduced.
82
.
.
Options
.
.
.
Options
.
OK (left softkey).
(right softkey).
Settings
.
.

Setting the Recording Guard

With this feature, you can record voice data without any
interruption by setting Airplane mode. (See page 36 for Airplane
mode.)
1. From the voice recorder menu, highlight Record and press
(right softkey).
Settings
2. Highlight Recording Guard and press
display.)
3. Press
OK (left softkey) to continue.
4. Highlight On and press
.
To deactivate this feature, select Off during step 4 above.
While Recording Guard is on, your phone's standby screen will
display "Phone Off".

Erasing Voice Recordings

To erase an individual voice recording:
1. From the voice recorder menu (see page 80), highlight Play or
Play:Speaker, and press
.
2. Highlight Voice Data and press
3. Highlight your desired voice recording and press
(right softkey).
4. Highlight Erase and press
5. Highlight Yes and press
.
To erase all voice recordings:
1. From the voice recorder menu (see page 80), highlight
Erase All and press
.
2. Highlight Voice Data and
.
3. Highlight Yes and press .
. (A message will
.
Options
.
83