Saving A 10-4 Number; Finding An Entry In The 10-4 List; Adding A New Contact To Your Personal List - Sanyo SCP-4920 User Manual

Saving a 10-4 Number

You can save a 10-4 number from the ending display to your
Personal List/Personal Groups.
1. From the ending display, press
2. Enter a name and press
3. Press
Save (left softkey).
4. Press
(left softkey).
Yes
Tip: If the entry already has a name, skip step 2 and 3 above.
Note: If the number is already stored in the Personal List/Personal Groups,
the "Save" softkey does not appear.

Finding an Entry in the 10-4 List

You can find your desired entry by entering a few letters.
1. Press (right softkey) or press
10-4
2. Press
Go to (left softkey), highlight your desired list
(Company List, Company Groups, Personal List, or
Personal Groups), and press
3. Enter the first letter or the first few letters of the name.
The display shows the list beginning with the letter(s) you
entered.
4. Scroll through the list and press
entry.
100
(right softkey).
Save
.
to access the 10-4 List.
.
to select your desired

Adding a New Contact to Your Personal List

You can store the total of 200 entries in the Personal List/
Personal Groups.
1. Press
(right softkey) or press
10-4
2. Press (left softkey), highlight Personal List, and press
Go to
3. Highlight <Add Contact> and press
– or –
Highlight an entry and press
highlight Add Contact and press
If the Personal List is full, you will see a warning message on
the display.
4. Enter a name for the new contact and press
name you will see when calling or receiving a call from the
contact.)
5. Highlight the 10-4 Number field, enter the contact's 10-digit
10-4 number (their Phone number) and press
6. Press
Save (left softkey) to save the new contact to your
Personal List.
Tip: You are not allowed to use the following symbols during step 4:
: , @ , ; , / , * , ) , and (.
to access the 10-4 List.
.
.
(right softkey). Then
Options
.
. (This is the
.
101