Using The Voice Recorder; Displaying The Voice Recorder Menu; Recording Voice Data; Reviewing Voice Recordings - Sanyo SCP-4920 User Manual

Using the Voice Recorder

This feature allows you to record voice data in standby mode.
Your phone can store up to 20 voice recordings and the total
available recording time is 50 minutes.

Displaying the Voice Recorder Menu

1. Press
to access the main menu.
2. Highlight Voice Services and press
3. Highlight Voice Recorder and press

Recording Voice Data

To record voice data:
1. From the voice recorder menu, select Record and press
2. Start recording after the beep.
Press Pause (right softkey) to pause the recording. To restart
recording, press
Record
To end the recording of your voice data:
Press , , or .
80
.
.
(right softkey).

Reviewing Voice Recordings

To play the recordings you have recorded:
1. From the voice recorder menu, highlight Play or Play:Speaker,
and press
2. Highlight Voice Data and press
3. Highlight a recording from the list and press
– or –
If you want to play all voice recordings continuously, highlight
All and press
4. Press
Press
Speed
Press
Pause
.
(right softkey).
Tip: Press and hold the navigation key right to fast-forward the recording;
press and hold the navigation key left to fast-rewind.
To set the starting point of the recordings:
1. From the voice recorder menu (see the previous page),
highlight Play or Play:Speaker and press
2. Highlight Voice Data and press
3. Highlight your desired recording and press
softkey).
4. Highlight Go to Time and press
5. Enter the time you want to start, and press
Tip: Go to Time
Tip:
Set the time by 30 seconds.
.
.
.
to stop playing.
(left softkey) to change the playing speed.
(right softkey) to pause. To restart, press
.
.
appears when the recording is longer than 30 seconds.
.
Play
.
(right
Options
(left softkey).
OK
81