Answering Calls - Sanyo SCP-4920 User Manual

Answering Calls

To answer an incoming call:
1. Make sure your phone is on. If your phone is off, incoming
calls go to voicemail.
2. Press
or (left softkey) to answer an incoming call.
Speaker
(Depending on your phone's settings, you may also answer
incoming calls by pressing any number key. See "Setting Any
Key Answer" on page 38 for more information.)
Your phone notifies you of incoming calls in the following ways:
The phone rings or vibrates.
The LED flashes.
The backlight illuminates.
The screen displays an incoming call message.
If available, the phone number of the caller is displayed.
If the phone number is in your Contacts list, the contact's
name is displayed.
10
The following options are also displayed by pressing
(right softkey).
To select an option, highlight it and press
Answer to answer the call.
Answer:Speaker to answer the call in speakerphone mode.
Don't Answer to hang up the incoming call and return to Web
while you are in the Web operation. (This feature appears
when Web access is dormant.)
Screen Call to answer the call by using pre-recorded
announcement. (This feature appears when you are in service
area or digital roaming area.) See page 87 for setting up.
Quiet Ringer to mute the ringer. (This feature appears when
the ringer is set.)
Note: If your phone is off, incoming calls go to voicemail.
Ending a Call
To disconnect a call when you are finished:
Press .
Tip: Time/Date is displayed when you press
Options
.
while the phone is in use.
11