In-Call Options; End-Of-Call Options; Saving A Phone Number - Sanyo SCP-4920 User Manual

In-Call Options

During a call, your phone displays menu options by pressing
Options
(right softkey).
To select an option, highlight it and press
Flash to answer an incoming Call Waiting call or connect a
third party during Three-Way Calling.
Mute to mute your phone's microphone. Select Unmute to
reactivate the microphone.
Speaker On or Speaker Off to activate or deactivate
speakerphone mode. You can adjust the speakerphone
volume using the Side Volume key.
Warning!
Due to higher volume levels, do not place the phone near your
ear during speakerphone use.
Three -Way Call to call a third party.
Call History to access the Call History menu. (See "Managing
Call History" on page 52.)
Contacts to access the Contacts menu. (See "Contacts
Directory" on page 55.)
Messaging to access the Messaging menu. (See "Messaging" on
page 110.)
Settings to access the Settings menu. (See "Your Phone's
Settings" on page 21.)
Tools/Extras to access the Tools/Extras menu. (See Calendar
menu instructions on page 63.)
Voice Services to access the Voice Services menu. (See
page 78.)
Note:
Flash menu appears in Call Waiting and Three-Way Call.
Mute menu does not appear during a 911 call.
14
.

End-of-Call Options

To display the following options, press
within 10 seconds after disconnecting a call.
To select an option, highlight it and press
Call Again to dial the phone number.
Call:Speaker On to dial the phone number in speakerphone
mode.
Save Phone# to save the phone number in your Contacts list.
Go to Phone Book appears when the number is already in your
Contacts list. (See "Saving a Phone Number" below.)
Note:
The End-of-Call options are not displayed for calls identified as
No ID or Restricted.

Saving a Phone Number

Your phone can store up to seven phone numbers in each of
300 Contacts entries. Each entry's name can contain 16 characters.
Your phone automatically sorts the Contacts entries alphabetically.
To save a number from the standby mode:
1. Enter a phone number.
2. Press Options (right softkey).
3. Highlight Save Phone# and press
4. Select a label by highlighting Mobile, Home, Work, Pager, Fax,
Other, or No Label and press
5. Enter a Name and press
Once you have stored an entry in Contacts list, you are
prompted to select the following entry modes:
New Name to enter a name directly.
From Ph. Book to select a name from the Contacts entry list.
6. Press Save (left softkey).
Options (right softkey)
.
.
.
.
15