Voice Recording Options - Sanyo SCP-4920 User Manual

Voice Recording Options

To switch speakerphone mode:
1. From the voice recorder menu (see page xx), select Play or
Play:Speaker and press
2. Select Voice Data and press
3. Select your desired voice recording and press Options (right
softkey).
4. Select Speaker On or Speaker Off and press
Tip:
You can also switch the speakerphone mode by pressing
softkey) during step 4 above.
To edit the title:
1. From the voice recorder menu (see page xx), select Play or
Play:Speaker and press
2. Select Voice Data and press
3. Select your desired voice recording and press Options (right
softkey).
4. Select Edit Title and press
5. Edit the title (up to 16 characters) and press OK (left softkey).
To set the audio quality:
1.
Display the voice recorder menu (see page xx).
2. Select Record and press Settings (right softkey).
3. Select Audio Quality or Mic Sensitivity and press
Audio Quality to change the recording quality.
Mic Sensitivity to change the microphone sensitivity.
4. Select High or Low and press
Note:
When Audio Quality setting is High, the total recording time will be
reduced.
.
.
.
.
.
.
.
(left
.
91