Selecting A Tone Length; Setting A Start-Up/Power-Off Tone; Using Voice Prompt; Adjusting The Phone's Volume Settings - Sanyo SCP-4920 User Manual

Selecting a Tone Length

1. Press
to access the main menu.
2. Highlight Settings and press
3. Highlight Sounds and press
4. Highlight Others and press
5. Highlight Tone Length and press
6. Highlight Short or Long and press

Setting a Start-up/Power-off Tone

1. Press to access the main menu.
2. Highlight Settings and press
3. Highlight Sounds and press
4. Highlight Others and press
5. Highlight Start-up Tone or Power-off Tone and press
6. Highlight your desired option and press
Tip: The volume of the Start-up Tone and Power-off Tone can be set
through the volume setting. See next page for instructions.

Using Voice Prompt

This feature allows you to hear voice prompts at Voice Recorder,
Screen Call setting or Voice Dial etc. (Default Setting is On.)
To deactivate this feature:
1. Follow the steps 1-4 above.
2. Highlight Voice Prompt and press
3. Highlight Off and press
Tip:
When ringer volume is set to "Silence All", voice prompts cannot be
heard.
24
.
.
.
.
.
.
.
.
.
.
.
.

Adjusting the Phone's Volume Settings

To adjust the ringer/key volume:
1. Press
to access the main menu.
2. Highlight Settings and press
3. Highlight Sounds and press
4. Highlight Ringer/Key Vol. and press
5. Select the menu you wish to change and press
6. Adjust the volume level by using the navigation key up or
down and press .
To adjust earpiece or speaker volume:
1. Press
to access the main menu.
2. Highlight Settings and press
3. Highlight Sounds and press
4. Highlight Receiver Vol. and press
5. Highlight either Earpiece or Speaker and press
6. Adjust the volume level by using the navigation key up or
down and press .
Tip: You can adjust the ringer volume in standby mode by using
the Side Volume key, and adjust earpiece volume during a call by using
the navigation key up or down or Side Volume key.
.
.
.
.
.
.
.
.
25