Features And Benefits - Trane Voyager Manual

Weather Tight Top and Cabinet
•
Voyager units incorporate either a
one piece top or the Trane-Tite-Top
(T 3 ). Each part of the top (either two
or three pieces) overlaps in such a
way that water cannot leak into the
unit. These overlapped edges are
gasketed and sealed to ensure
superior water integrity.
•
Quick-Sess™ (3-7½ tons) and
Quick- Access (8½-25 tons) panels
reduce the number of possible
water entry points.
•
For added water integrity, Voyager
has a raised 1 1 / " lip around the
8
supply and return of the downflow
units to prevent water from blowing
into the ductwork.
Quality And Reliability Testing
•
The fan and idler arm assembly
designs have been tested to over
300,000 cycles each. Our combined
cycle testing is now over 7,000,000
cycles.
•
All of Voyager's designs were
rigorously rain tested at the factory
to ensure water integrity.
Features
and Benefits
•
Actual shipping tests are performed
to determine packaging require-
ments. Units are test shipped
around the country to determine the
best packaging. Factory shake and
drop tests are used as part of the
package design process to help
assure that the unit will arrive at
your job site in top condition.
•
Rigging tests include lifting a unit
into the air and letting it drop one
foot, assuring that the lifting lugs
and rails hold up under stress.
•
We perform a 100% coil leak test at
the factory. The evaporator and
condenser coils are leak tested at
200 psig and pressure tested to 450
psig.
•
All parts are inspected at the point
of final assembly. Sub-standard
parts are identified and rejected
immediately.
•
Every unit receives a 100% unit run
test before leaving the production
line to make sure it lives up to
rigorous Trane requirements.
We test designs at our factory not
on our customers!
Ease Of Installation
Contractors look for lower installa-
tion (jobsite) costs. Voyager's
conversionless units provide many
time and money saving features.
4
Conversionless Units
•
The dedicated design units (either
downflow or horizontal) require no
panel removal or alteration time to
convert in the field — a major cost
savings during installation.
•
Horizontal units come complete with
duct flanges so the contractor doesn't
have to field fabricate them. These
duct flanges are a time and cost
saver.
Improved Airflow
•
U-shaped airflow allows for improved
static capabilities.
Single Side Access
•
Access to Voyager's components is
accomplished through the Quick-Sess
and Quick-Access panels. No more
than three screws must be removed
to access components.
Trane's Idler Arm Assembly
•
Our idler pulley provides quick-
adjustment for belt or motor sheaves.
It utilizes a design for the 8½-25 ton
units. No longer does the contractor
have to adjust the motor to tighten the
belt or change the motor sheave
setting. A real time saver in servicing
and installing.