York YK Style H Operation Manual page 192

SECTION 4 - PRINTING
3. Setup HyperTerminal
a. Go to START menu
b. Select All Programs
c. Select Accessories
d. Select Communications
e. Select HyperTerminal
f. In the box displayed, it requires a name and
icon for the connection. Select a name that
is descriptive and select an icon. Select OK.
g. In the box labeled Connect using the select
com port that will connect to the YK unit.
This port is usually labelled Com 1. Select
OK.
h. Port settings
Bits per second
Data bits
Parity
Stop Bits
Flow control
4. Set HyperTerminal to capture a file.
a. Select Transfer from toolbar
b. Select Capture Text from the drop down
menu.
c. A Capture Text Filebox will be displayed.
Verify location and file name.
d. Select Start.
5. Press the Print Screen key on the appropriate
screen to be captured. The HyperTerminal will
display the printed information and the informa-
tion will be recorded as a .txt file.
When the print file has been recorded, select
Transfer from the toolbar and capture from the
drop down menu and select Stop. This will stop
the transfer and allow access to the capture file.
192
57600
8
None
1
None
The following additional RS232 connections, are used to
wire up serial devices for desktop and laptop computers.
RS-232 PIN ASSIGNMENTS
(DB25 PC SIGNAL SET)
(OLDER DESKTOPS ONLY)
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Recieved line Signal Detector
Pin 8
Pin 20
Pin 22
The connector on the PC has Male pins, therefore the
mating cable needs to terminate in a DB25/F (Female
pin) connector.
RS-232 PIN ASSIGNMENTS
(DB9 PC SIGNAL SET)
(MOST LAPTOPS)
Recieved line Signal Detector
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
Pin 9
The connector on the PC has male pins; therefore, the
mating cable needs to terminate DB9/F (female pin)
connector.
FORM 160.76-O2
issue date: 6/15/2015
Protective Ground
Transmit Data
Recieved Data
Request To Send
Clear To Send
Data Set Ready
Signal Ground
(Data Carrier Detect)
Data Terminal Ready
Ring Indicator
(Data Carrier Detect)
Recieved Data
Transmit Data
Data Terminal Ready
Signal Ground
Data Set Ready
Request To Send
Clear To Send
Ring Indicator
JOHNsON CONtROLs