Table of Contents
Advertisement
4.3 Display Unit Buttons Operation
(1) Group selection
[Procedure]
1) Click the Floor display unit button
2) Select the object group from the floor switching buttons (left-hand side of
screen)
The selected floor is exhibited on the display & operation screen.
3) Click the object group icon on the displayed floor
(2) Floor selection
[Procedure]
1) Click the Floor display unit button
2) Select the object floor from the floor switching buttons (left-hand side of
screen)
The object floor is exhibited on the display & operation screen
3) Click the Floor batch process button at the bottom right-hand corner of
the screen
(3) Block selection
[Procedure]
1) Click the Block display unit button
All the blocks are exhibited on the display & operation screen.
2) Select the object block from the display & operation screen
(4) Whole building selection
[Procedure]
1) Click the Whole building display unit button
The whole floor is exhibited on the display & operation screen.
2) Click the Building batch process button (bottom right-hand corner
of screen)
Floor switching buttons
6
Floor screen
Floor batch process button
Floor screen
Block screen
Building batch process button
Whole building screen
Advertisement
Table of Contents
