Table of Contents
Advertisement
Note:
- Underlined Output type set screen is used in common with other functions. For more information, see par. "9.3 (5) Output
type setting".
- For Without WHM connection, the output object is only All blocks.
Output the air-conditioning charge by specifying last month, 2 months before, or 3 months before
[Procedure]
1) Select Whole building output
When the Whole building output button of the Whole building object but-
tons at the right-hand side of the screen is clicked, the Individual output set
screen opens.
2) Select the output object watt hour
Click All blocks, All watt-hour meters, or All blocks and all watt hour meters.
3) Specify the output month
Specify the date by clicking the output month.
4) Select Output or Cancel
After specifying the output object and month, click the Output button.
Output: Accepts the setting and advances to the Output type set
screen.
Cancel: Rejects the setting and returns to the Air-conditioning energy
monitoring screen.
The above ends whole building output setting.
Note:
- The underlined Output type set screen is used in common with other functions. For more information, see par. "9.3 (5)
Output type Setting".
- For Without WHM connection, the output object is only All blocks.
(5) Output type Setting
The following operations are necessary at output functions (3) and (4) above.
[Procedure]
1) Select the output type
The output type is displayed. To print, click Printing output and to output a
file, click Exporting file and input the filename.
2) Select Output or Cancel
After selecting the output type, click the Output button.
Output: Performs output processing and ends this function.
Cancel: Ignore the changes and returns to the Air-conditioning energy
monitoring screen.
9.4 Under Stop Charge
"Under stop charge" is the standby use electric power charge by watt hour meter used by the outdoor unit crankcase heater.
Output and display the electric power amount and charge under stop
[Procedure]
1) Select Electric power under stop
When the Electric power under stop button of the Whole building object
buttons at the right-hand side of the screen is clicked, the Electric power
under stop screen opens.
2) Check the display contents
The electric power under stop for up to three months is displayed.
3) Select Output or Cancel
After specifying the output object and date, click the Output button.
Output: Accepts the changes and advances to the Output type set
screen.
Cancel: Ignore the changes and returns to the Air-conditioning energy
monitoring screen.
The above ends electric power under stop output setting.
31
Advertisement
Table of Contents
