Table of Contents
Advertisement
(6) Individual specification
Specifies an individual object and calculates and outputs the air-conditioning charge.
1) Date specification
Specifies the date and calculates and outputs the air-conditioning charge for the selected block.
2) Individual output
Calculates and outputs the air-conditioning charge for the selected block.
(7) Whole building object
Sets, calculates and outputs the air-conditioning charge for the whole building.
1) Whole term day specification
Specifies the term day and calculates and outputs the air-conditioning charge for all blocks, or all watt hour meters.
2) Whole building output
Specifies the term day and calculates and outputs the air-conditioning charge for all blocks and all watt hour meters.
3) Settlement date designation
Specifies the air-conditioning charge settlement date designation.
4) Electric power under stop
Displays and outputs the electric power under stop.
5) Charge set
Calls the Air-conditioning energy monitoring basic set screen.
(8) Recalculation
Recalculates the air-conditioning charges.
(9) Calculated charge display
Displays and outputs the billing electric amount and calculated air-conditioning charge.
(10) Percentage accuracy display
Displays and outputs the billing electric amount and percentage accuracy.
9.2 Block and Watt Hour Meter Air-conditioning Energy Monitor Display
(1) Select the display object
1) Select the display object.
With WHM connection
Select the display object with the Charge block or Watt hour meter but-
ton at the top left-hand side of the screen.
Without WHM connection
Select the display type with the Calculated charge display or Percentage
accuracy display button at the top left-hand side of the screen. The dis-
play object is only Block.
(2) Display color
Characters color
Black characters: Normal
Red characters:
Abnormal
Blue characters: Maintenance
Note:
- The electric amount, charge, etc. displays are the values with the
undisplayed digits raised to the next higher digit. The total is the
total of the displayed values.
- When the maintenance function was used to change and recalcu-
late the Apportioned electric power, the characters turn to blue.
- For a description of the maintenance function, refer to Field
Adjustment manual section "9.2 Charge Data Maintenance".
- For a description of the recalculation function, see section 9.6
Recalculate the air-conditioning charge.
9.3 Air-conditioning Charge Output
(1) Set the automatic printing function
[Procedure]
1) Select Settlement date designation
When the Settlement data designation button is clicked, the settlement
of date designation screen opens.
2) Specify the settlement date
When specifying the end of month, click End of month.
When specifying other than the end of month, click Manual.
Set the date by clicking the
(The date can also be input from the keyboard.)
/
buttons.
28
Advertisement
Table of Contents
