Table of Contents
Advertisement
10. System Display
The current system configuration and charge system can be displayed.
This function checks the system status, but cannot change it.
10.1 System configuration display
For the units corresponding to the icons displayed on each set screen, see
the table at the right.
Select System configuration view in the View menu bar
The system configuration screen appears.
Note:
- When changing the system configuration, refer to Site Adjustment
manual section "8.5 System Configuration Setting".
(1) GateWay unit configuration
Select System configuration view in the View menu (menu bar).
Displays the number of set G/W and the unit configuration of each G/W.
Select the G/W to be displayed by clicking the
The numeric in the frame is the address. The displayed icons indicates that
the units are connected to the selected G/W.
The screen can also be printed with the print button.
After checking the set contents, click the Next button
Next: Advances to the next screen.
Exit: Returns to the Management screen.
G/W No.
(2) Refrigerant system setting display
Displays the refrigerant system of each outdoor unit at each G/W.
Indicates that units in the same row are connected to the OC at the left-hand side of the screen.
Select the G/W to be displayed by clicking the
The screen can also be printed with the print button.
After checking the set contents, click the Next button
Next: Advances to next screen.
Exit: Returns to Management screen.
Back: Returns to last screen.
G/W No.
/
buttons
/
buttons
33
Icon
Name
IC
Indoor unit
KIC
K control indoor unit (A control)
LC
Lossnay
FU
OA Processing unit
OC
Outdoor unit
BC
BC controller
OS
Subsidiary outdoor unit
RC
Remote controller
GR
Group remote controller
SR
System remote controller
Lossnay remote controller
LR
TR
Centralized remote controller
AN
On/Off controller
SC
System controllers
Set G/W number
Print button
Connected unit
Print button
Set G/W number
Advertisement
Table of Contents
