Table of Contents
Advertisement
10.2 Charge system display
See the table at the right for the units corresponding to the icons displayed
on the setting screens.
Select Energy monitoring view in the View menu bar
The charge system screen is displayed.
Note:
- When changing the charge system, refer to Site Adjustment manu-
al section "8.7 Charge System Setting"
- Some charge system display screens may not be displayed,
depending on the setting mode.
(1) Watt-hour meter name and maximum integrated value display
Displays the name and maximum integrated value of the connected and set watt-hour meters.
This screen can also be printed with the Print button.
After checking the set contents, click the Exit button
Next: Advances to next screen.
Exit: Returns to Management screen.
Watt-hour meter name
(2) Division mode display
Displays the division mode setting state.
This screen can also be printed with the Print button.
After checking the set contents, click the Next button
Next: Advances to next screen.
Back: Returns to last screen.
Exit: Returns to Management screen.
Icon
IC
LC
FU
KIC
OC
36
Name
Indoor unit
Lossnay
OA Processing unit
K control indoor unit (A control)
Outdoor unit
Print button
Print button
Advertisement
Table of Contents
