Table of Contents
Advertisement
(6) History output
Outputs daily or monthly history.
The output type can be selected from printing output and file output (text format). (Search results history cannot be output.)
[Procedure]
1) Select Daily or Monthly
When the Daily or Monthly button is clicked, the Output History screen
opens.
2) Input the date to be printed
Set the date with the
part.
When the numeric part is clicked, the date can also be input from the key-
board. At the end of input, click the Output button. (Click the Cancel but-
ton to stop output.)
3) Select printing output or file output
For printing output, click the Printing output option button and for file out-
put, click the Exporting file option button. For file output, input the file-
name. The save location can be referenced with the Reference button.
4) Select Output or Cancel
When the Output button is clicked, the histories generated within the input
range are output.
Output: Outputs the histories generated within the specified range and
returns to the history screen.
Cancel: Returns to the history screen without outputting the histories.
8.2 Cumulative Time Monitor
(1) Switch from Management screen to cumulative time monitor
[Procedure]
1) Select Cumulative time
When the Cumulative time function select button is clicked, the cumulative
time monitor screen opens. Select the target floor with the floor switching
buttons.
(2) Description of cumulative time monitor
The cumulative time monitor displays Group Address - Group Name -
Cumulative Time, from left to right.
The cumulative time unit is "hours".
(3) Cumulative time monitor operation
[Procedure]
1) Select Update of Display.
When the Update of display button is clicked, the cumulative time is updat-
ed to the current cumulative time. The updated time is displayed next to
Display Time at the right-hand side of the screen.
(4) Cumulative time clear
[Procedure]
1) Select the group whose cumulative time is to be reset
When the group to be clear is clicked on the screen, that group changes
to the selected blue color. When that group is clicked again, it is released.
All the groups can be selected with the All select button.
All selections can be released with the All release button.
2) Select Cleared
When the Clear button is clicked, the cumulative time of the selected
group is cleared.
(5) Cumulative time output
This function outputs the cumulative time screen. The output type can be selected from printing output or file output (text format).
/
buttons at the right-hand side of the numeric
Note:
- Once cleared, cumulative time cannot
be recovered.
23
Advertisement
Table of Contents
