Riello 7200.200 V PLUS Installation, Operation And Maintenance Manual page 12

7200 v plus series
Table of Contents

Advertisement

INSTALLER
INSTALLER
If suitable equipment is not on hand to lift the storage cylinder
off the pallet using the eyebolt, proceed as follows.
− Place a platform of about half the height of the pallet
near the storage cylinder. Make sure the platform is able
to support the weight of the storage cylinder.
− Remove the brackets (1) then carefully rotate and slide
the storage cylinder off the pallet on to the platform
− Make sure that the storage cylinder is perfectly stable,
and then remove the pallet
− Carefully rotate and slide the storage cylinder off the
platform on to the floor
− Remove the platform. Position the storage cylinder as
required.
Adjust the feet to ensure that the storage cylinder is perfectly
level.
9
Wear suitable personal protective equipment and use
suitable safety devices.
0
Do not dispose of packaging material into the environment,
or leave it within the reach of children, since it can become
a potential hazard. Dispose of packaging material in
compliance with applicable legislation.
MODELS 7200 V Plus 800 to 1000
Make sure that any lifting equipment is of adequate capacity to
lift and move the storage cylinder.
Remove the brackets (1) to free the storage cylinder.
To lift the storage cylinder, remove the plug (2), insulation (3) and
magnesium anode (4) and screw an eyebolt (Ø 1 ¼") of suitable
capacity for the weight of the cylinder into the hole (5).
If suitable equipment is not on hand to lift the storage cylinder
off the pallet using the eyebolt, proceed as follows.
− Place a platform of about half the height of the pallet
− Remove the brackets (1) then carefully rotate and slide
− Make sure that the storage cylinder is perfectly stable,
− Carefully rotate and slide the storage cylinder off the
17
− Remove the platform. Position the storage cylinder as
12
1
1
near the storage cylinder. Make sure the platform is able
to support the weight of the storage cylinder.
the storage cylinder off the pallet on to the platform
and then remove the pallet
platform on to the floor
required.
2
3
4
5
1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents