Attach The T-Manifold Assembly - Agilent Technologies G3437A Installation Instructions Manual

Agilent G3437A Side-Mounted Thermal Conductivity Detector
7
Figure 18 TCD module installed

Attach the T-manifold assembly

1
2
14
Orient the pneumatics tubing downwards so that it doesn't interfere with
the TCD board installation.
Using a 1/8" nut and ferrule, attach one end of the T-manifold assembly
short tubing arms to the EPC module reference gas fitting.
Using a 1/8" nut and ferrule, attach one end of the T-manifold assembly
short tubing arms to the EPC module makeup gas fitting.
Heater cable connected and
tucked behind bezel
Screw locations
Pneumatic tubing
Installation Instructions