Safety Instructions - Wolf CFL-WRG Installation And Maintenance Instructions Manual

Safety instructions
4
2. Safety instructions
In addition to installation and maintenance instructions, there are notes attached
to the unit in the form of labels. These must also be observed.
Only qualified and trained personnel may be appointed for the installation,
commissioning, maintenance and operation of the unit.
Only qualified electricians are permitted to work on the electrical system.
VDE regulations [or local regulations] and those of your local power supply
utility are applicable to electrical installation work.
Only operate the unit within its output range, which is stated in the technical
documentation supplied by Wolf.
Only operate the unit if it is in technically sound condition.
Any faults or damage that impact or might impact on the safety or correct function
of the unit must be remedied immediately by qualified personnel.
Replace faulty components and equipment only with original WOLF spare parts.
The unit may only be used for handling air. This air must not contain
Please
any harmful, combustible, explosive, aggressive, corrosive or otherwise
note
dangerous substances, as these would be distributed throughout the
duct system or building, where they could cause a risk to the health of,
or even kill the occupants, animals or plants living there.
3065065_201704